Sonnet-technologies Echo Express SEL User Manual

User’s Guide for Echo™ Express SEL Thunderbolt™ 2-to-PCIe Card Expansion Chassis

6Chapter 3 – PCIe Card Installation StepsFigure 7 12. Turn the Echo Express SEL right-side-up. 13. Connect a Thunderbolt cable between either Thunder

7Chapter 4 – Verify Connections Using System InformationFigure 8Figure 9A – Verify the Echo Express SEL is Recognized 1. With the Echo chassis powere

Chapter 5 – Tips, General Information, and Known IssuesKNOWN ISSUESNot all PCIe Cards Will Perform at 100% Thunderbolt 2’s PCIe bandwidth is limited t

Chapter 6 – Specifications, Precautions, FCC Compliance, and Support InformationWarnings (continued)• Follow the instructions in this manual carefully

©2014 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Echo, Presto, and Tempo are t

1 Introduction and System Requirements... 12 Echo Express SEL De

This page left intentionally blank

1Chapter 1 – Introduction and System RequirementsIntroductionCongratulations on your purchase! The Echo Express SEL is a Thunderbolt 2 expansion syste

2Echo Express SEL Exterior1 – Power Indicator This lights when the Echo Express SEL is powered, the Thunderbolt cable between the chassis and your co

3Echo Express SEL Inner Assembly1 – Thunderbolt Interface Card This is installed into its own slot and may not be moved to the PCIe slot.2 – PCIe Sl

4Chapter 3 – PCIe Card Installation StepsFigure 1 1. Remove the Echo Express SEL chassis from its packaging, and then set it upside-down on a soft, fl

5Chapter 3 – PCIe Card Installation Steps 6. Remove the PCIe card from its packaging, handling the card by its edges and without touching any compo